Black Silicon Carbide Resin Grinding Wheel For Stone Polishing | 4,7 Inch

4,7 inch black silicon carbide resin grinding wheel

SPECIFICATION

 4,7 inch black silicon carbide resin grinding wheel for stone with M14,5/8″-11 are designed to be used in specific applications and in very specific ways.

Cup wheels are to be used for face grinding only. These wheels are preferred for shaping and pre-beveling or pre-shaping stone including marble granite quartz. They can be used wet or dry, when used at the proper RPM.

Safety Tip: Silicon Carbide cup wheels can fracture and rapidly decompose if they are not used properly, or are if they dropped, cracked, or abused. It is essential to store and handle them properly. That’s why When using Silicon Carbide Cup Wheels, a full face shield is required:
Fabricator’s Tip: Prolong your Silicon Carbide tool life by using the Dressing Stone Tool to remove rough and irregular edges that occur on S.C. Cup Wheels with regular use.
Note: Silicon cup wheels should only be used as manufacturer recommendations specify, and with a face shield. Any misuse or failure to follow safety recommendations can result in great bodily harm.

Fabricator’s Safety Note: 4 inch cup wheels are designed for use on the FLAT FACE ONLY, do not use the round side for grinding. Grinding with the side of a cup wheel can cause damage to cup wheel and serious injury to the operator.

Always use a grinder guard and wear safety glasses and a face shield when using SC cup wheels and similar grinding tools.