Air / Wet Polisher l Thread Pneumatic Air Tool
Name: Side exhaust air polisher/ Pneumatic wet polisher
Description:
Compressed air should be dry and cool, as high-moisture air will lead to internal rusting that could cause machine failure.
the air pressure should normally be maintained at 90PSI~116PSI(0.62MPa~0.8MPa).
Always supply adequate water during operation. Air/Wet Polisher.
To avoid machinery failure during operation, make sure the machine is filled with 10# oil before operation.
When grinder will stop working, especially if it will be not used for a period of time, the machine should be well oiled and rotate for almost five seconds without loading before off it, this is a super important step to avoid rusting
Package :
1 x Side Exhaust Air Wet Polisher Thread M14 OR 5-8-11
1 x 4 inch Aluminum Backer Pad
During using:
1. Compressed air should be dry and cool, as high-moisture air will lead to internal rusting that causes machine failure.
2. The air pressure should normally be maintained at 90 PSI-116 PSI(0.62MPa~0.8MPa)
3. Always supply adequate water during operation.
4. To avoid machinery failure during operation, make sure the machine is filled with 10# oil before operation.
5. When the grinder will stop working, especially if it will be not used for a period of time, the machine should be well oiled and rotate for almost five seconds without loading before off it, this is a super important step to avoid rusting.
6. Machine should be well oiled to prevent rusting especially after a period of non-use.
7. To prevent rusting, always check that there is special-purpose oil in the machine. If the Air/Wet Polisher is not functioning properly, manually spin the sander.
8. Prevent any rust into rubber connection.
Reviews
There are no reviews yet.